网站首页    Chemical Building Materials    Ethyl Cellulose (EC)
乙基纤维素0000

Ethyl Cellulose (EC)

This product is non - ionic cellulose ether, insoluble in water. EC Synthetic plastics, coating, rubber substitute for resin, printing ink, insulation materials, also used in coating, adhesive, adhesive, paper sizing agent, fabric finishing agent, paint carrier, etc., can strip coating spraying solvent, hot melt type can be peeling paint, decorative cloth flame retardant finishing agent, food packaging mouldproof paper coating, plastic printing ink, to the lotion, etc.

Ethyl cellulose ( EC )

Ethyl cellulose can't dissolve in   water, but soluble in many organic solvents, so EC used in tablets, granules   of its adhesive agent. It can increase the hardness of tablets to reduce   friability tablets, it can be used as film-forming agent to improve the appearance   of tablets, isolated taste, to avoid the failure of water-sensitive drugs to   prevent the influx of metamorphic change agents, promoting the safe storage   of tablets, also can be used as reinforcing material for sustained release   tablets.

 

Items

K grade

N grade

Ethoxy ( WT% )

45.5 – 46.8

47.5 – 49.5

Viscosity mpa.s 5% solu. 20 *c

4, 5, 7, 10, 20, 50, 70, 100, 150, 200,   300

Loss on drying ( % )

≤ 3.0

Chloride ( % )

≤ 0.1

Residue on ignition ( % )

≤ 0.4

Heavy metals ppm

≤ 20

Arsenic ppm

≤ 3

 

EC can be dissolved in various   organic solvents, such as ethanol, isopropyl alcohol, other alcohols,   ketones, aromatic and so on. Common solvent (volume ratio):

 

1) Toluene:Ethanol = 4:1
  2) Ethanol
  3) Acetone:Isopropanol = 65:35
  4) Toluene:Isopropanol = 4:1
  5) Methyl Acetate:Methanol = 85:15

Alcohols and aromatics in the   viscosity of the mixture, going down with alcohol content higher, when   alcohol accounts for 30-35%, the lowest viscosity of the composition.   Dissolution method: the EC under the stirring slowly add the container filled   with a solvent until complete wetting dissolved.